Sar B6P vs CZ75B Part 1 of 2 : Table Top Comparison

Without Further Ado . . .

SAR on the left / CZ on the right – A some of the differences between the two are aesthetic – some are ergonomic – some are out of necessity . . .

Ready?? – Here we Go!

From the top of the pic down – the end of the slide on the CZ has a “rounded” or more finished look than the SAR, which comes across as almost slab sided – from the end of the frame to the trigger guard the CZ is scalloped / the SAR is not – polymer vs metal / metal is stronger / less of it is needed – More polymer is used where the trigger guard goes into the frame on the SAR – at the rear of the trigger guard SAR undercuts the trigger guard to get a grip height on par with the CZ . . .

The square block of polymer above the trigger ( to the left in this pic ) on the SAR is to support the locking block / metal chassis and pin that holds it – CZ is a machined part of the metal frame – the area around the trigger guard is scalloped on the CZ – not on the SAR – again less metal = same or more strength than polymer – moving down to the next pic look at the slide serrations – the bigger serrations on the SAR slide are considerably less costly to machine than the ones on the CZ – at the bottom of the pic – the longer beavertail combined with the deeper space for the web of your hand makes a noticeable difference in the “feel” or ergonomics of the SAR . . .

Another look at the grip frames and beavertails – the little “hump” at the top of the back side of the grip frame ( just above the back strap texturing ) on the SAR is very subtle but makes quite a difference in the “feel” – I added the grip tape as the texturing on the SAR was almost “slick” feeling to me . . .

A better look at the “grip frame” area on both – CZ on the left – SAR on the right -the SAR has a more pronounced “lip” at the bottom of the grip frame to give a little more support for your pinky – the differences are subtle – but they are there and give it a different feel . . .

And another look at the grip frame beavertail areas . . . The ergonomics on the SAR are really quite good . . .

The CZ slide ( top ) has a “smoother” look to it – more rounded than the SAR slide – the more machining – the higher the cost . . .

Underside of the slides – CZ on the left / SAR on the right – no surprises – the SAR does have a full length metal guide rod . . .

Looking in the frames ( CZ on he left ) – the locking block is part of the metal frame of the CZ – the locking block is an insert on the SAR – that’s how you get the “bumps” on frame of the SAR – re-enforcement for the block and the pin holding it in place . . .

Looking at the “actions” ( CZ on the left ) – Yeah I know, they are both getting a scrub down after the shooting part of this – notice the wider hammer and beavertail on the SAR – the hammer doesn’t make much difference but the wider beavertail does – it’s not a lot but again all the little differences add up! – and yes the actions are different ( they are both DA/SA ) – more on that in part 2 . . .

Looking down the magwells ( CZ on the left ) – the CZ uses less material – metal is stronger than polymer . . .

Bottom of the frames ( CZ on the left ) – a little more trigger guard material and dust cover width on the SAR . . .

Empty weight -no mag – CZ75B . . .

Empty weight – no mag – SAR B6P . . .

7.3 oz difference in weight makes quite a difference carrying the pistol – that extra weight with the CZ really “adds up” over the course of the day . . .

So let’s drag all these thoughts together ( and they are ALL kicking and screaming ) – looking at what we have so far . . .

CZ 75’s just “feel” right – great pistols. SAR B6P “feels” righter in the hand – or good and gooder – if that makes any sense to you at at all. and for those of you that it does make sense to I am beginning to wonder about you – just saying – not necessarily better but it “fits” better. and that’s totally subjective. the weight difference is significant – and it DOES affect recoil – it is after all the LAWS of physics – not the suggestions – which we will look at in part two. Both with loaded mags in place – the SAR is has just a little nose heavy feel which is more pronounced when empty – less weight in the frame to offset the slide weight. The CZ has a smoother D/A trigger pull and a cleaner S/A break than the SAR – not a major OMG or a deal breaker but there is a difference. The SAR carries a lot easier because of the weight difference. Hell I carry full size 1911’s – damn near EVERYTHING carries “easier” – LMAO!!

I will try to get to the range during the day next week without my blushing bride and shoot them both side by side – and then when “we” get to the range I will get her to shoot them side by side and try to wrap this whole pile up and get it in one bag – and then try not to lose the bag!!

Have Fun! – Run the Gun! – and remember – Fish Heads are Cheap!!

Bill Gates: Western Taxpayers Must Pay for Rest of the World’s COVID Vaccinations

Billionaire argues US and European governments should foot the bill

( NEWSFLASH – That’s YOU and ME People – WAKE THE FUCK UP!! )

FROM NEON NETTLE DOT COM < CLICK HERE TO GO THEIR HOME PAGE

( click below to go straight to the article )

Billionaire Bill Gates is calling for taxpayer money from Western nations to be used to fund COVID-19 vaccines in countries around the world.

Microsoft CEO-turned-coronavirus enthusiast Gates argues that nations in the West must dedicate more government funding for vaccines and distribution networks around the globe.

According to Gates, paying for billions of doses of vaccines for poorer countries is the only way we can eradicate COVID-19 in the West and return to our normal lives.

Gates, the second richest man in the world, says third world countries don’t have the financial clout to strike deals, such the $2 billion agreement that Washington struck with Pfizer, so the responsibility falls into the lap of the Western taxpaying public.

Hoarding supplies of vaccines isn’t just wrong, Gates argues, it’s counterproductive – and we in the West must pay the costs involved in vaccinating everyone, in every country.

But it’s not just a question of donating supplies, however . . .

Go <HERE> and read of the wisdom and illumination that Dr. Gates is blessing us with – one of my favorite sentences that I can never find a good place to insert has found a home here with this article – “Fuck You You Fucking Fuck!” – or to quote Bugs – “What a Maroon” . . .

Have Fun! – Run the Gun! – and remember – Fish Heads are Cheap!!